Search results for "Total petroleum hydrocarbon"
showing 7 items of 7 documents
Effect of a co-substrate supply in a MBR treating shipboard slop: Analysis of hydrocarbon removal, biomass activity and membrane fouling tendency
2018
The paper reports the main results of an experiment carried out on a membrane bioreactor (MBR) plant designed for the treatment of shipboard slops. With a view of a co-treatment process of the slop with other wastewaters, sodium acetate, as external co-substrate, was supplied (high dosage – Period 1, low dosage – Period 2) to evaluate its effects on hydrocarbons removal. The MBR pilot plant enabled approximately 99% of total petroleum hydrocarbon (TPH) removal during the entire experiment, confirming the robustness of the MBR technology for the treatment of slops. The chromatography/mass spectrometry analysis showed that the removal efficiency for each alkane was close to the value observed…
Aerobic granular sludge treating shipboard slop: Analysis of total petroleum hydrocarbons loading rates on performances and stability
2018
Abstract The work focuses on the feasibility of treating slop with aerobic granular sludge. For this purpose, a 3.5 L granular sequencing batch reactor was activated and it was monitored for 156 days. The experimental campaign was divided into two periods, named Period I (100 days) and Period II (56 days). Total Petroleum Hydrocarbon (TPH) concentration in the slop was, on average, equal to 6.8 ± 1.5 mg L−1 and 13 ± 1.5 mg L−1 in Period I and Period II respectively. The obtained results during the first experimental period indicated that about 80 days were required to reach steady state with mature granules, when TPHs removal efficiency was approximately 90%. The results indicated that both…
Preliminary insights about the treatment of contaminated marine sediments by means of bioslurry reactor: Process evaluation and microbiological chara…
2022
Abstract Contaminated marine sediments represent a critical threat towards human health and ecosystems, since they constitute a potential reservoir of toxic compounds release. In the present study, a bioslurry reactor was studied for the treatment of real marine sediments contaminated by petroleum hydrocarbons. The experimental campaign was divided in two periods: in the first period, microcosm trials were carried out to achieve useful indicators for biological hydrocarbon removal from sediments. The microcosm trials highlighted that the inoculum of halotolerant allochthonous bacteria provided the highest performance followed by autochthonous biomass. Based on the achieved results, in the s…
Treatment of Oily Wastewater with Membrane Bioreactor Systems
2017
The aim of the present work was to investigate the behavior of a membrane bioreactor (MBR) system for the treatment of oily wastewater. A bench scale MBR was fed with synthetic wastewater containing diesel fuel. Organic carbon, hydrocarbon and ammonium removal, kinetic constants, extracellular polymeric substances production, and membrane fouling rates were monitored. The MBR plant was operated for more than 200 days, and the results highlighted good carbon removal and nitrification, suggesting a sort of biomass adaptation to hydrocarbons. Membrane fouling analysis showed an increase in total resistance, likely due to hydrocarbons, which caused an irreversible fouling (pore blocking) mainly…
The effect of hydrocarbon on a pilot plant membrane bioreactor system
2015
The paper reports the main results from an experimental gathering campaign carried out on a bench scale plant for the evaluation of hydrocarbon effect on the system performance. In particular, a membrane bioreactor (MBR) under submerged configuration was analysed. The MBR plant was fed with synthetic wastewater containing hydrocarbons. Organic carbon, hydrocarbons and ammonium removal, kinetic constants, extracellular polymeric substances (EPSs) production and membranes fouling rates have been assessed. The observed results highlighted good system performance in terms of both COD removal and nitrification, thus showing a sort of biomass adaptation to hydrocarbon. Such a result has been also…
Total petroleum hydrocarbons (TPH) determination in surfactant stabilized marine water emulsions
2022
Bilge waters are wastewaters produced on boats during navigation and usually contain hydrocarbons and oils. They cannot be released into the sea if not below certain hydrocarbon concentration limits set by current legislation. Surfactants are often used to improve the solubility of petroleum hydrocarbons in water and in this work, the analytical approach proposed is suitable to determine accurately the concentration of hydrocarbons in surfactant-rich waters, as found in bilge water or similar wastewater. The method relies on the surfactant precipitation by addition of potassium and calcium salts, which also promote TPH extraction through a “salting out” effect. This allows for an accurate d…
THE USE OF MBR SYSTEMS FOR THE TREATMENT OF REAL SHIPBOARD SLOPS: ANALYSIS OF BIOLOGICAL PERFORMANCE AND BIOMASS BIOKINETIC ACTIVITY
2016
In order to prevent hydrocarbon discharge at sea from ships, the International Maritime Organization (IMO) enacted the MARPOL 73/78 convention in which any oil and oil residue discharged in wastewater streams must contain less than 5 ppm hydrocarbons. Effective treatment of this petroleum-contaminated water is essential prior to its release into the environment, in order to prevent pollution problem for marine ecosystems as well as for human health. The present paper reports the first results of a field gathering campaign aimed at gaining insight about the treatment of real shipboard slops with a MBR pilot plant, in terms of pilot performance and biomass biokinetic activity. The achieved re…